CAM-PIRHDA10W-BU

$69.99
In stock
SKU
CAM-PIRHDA10W-BU
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 36.14ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
1 Pack Add–On 1080p Wired HD Analog Security Camera with Heat Based Motion Detection

Product Compatibility - Click here

CAM-PIRHDA10W-BU
CAM-PIRHDA10W-BU CAM-PIRHDA10W-BU CAM-PIRHDA10W-BU CAM-PIRHDA10W-BU

  • 1080p Indoor/Outdoor Wired Infrared Camera
  • Reduces False Alerts by up to 90% to your Smart Device
  • 100 ft. of Night Vision
  • 100° Wide-Angle Viewing
  • Includes 60 ft. of Camera Cable per Camera
  • 24/7 Technical Support
  • Camera Requires Compatible DVR
  • Compatible with Night Owl AHD10, HDA and XHD Series HD DVRs

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 8.26ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

is this camera compatible with the DVR-X3-161? Specifically the smart heat motion detection ability.

Asked by: Ssithnos
Yes, this camera is compatible with our NIght Owl DVR-X3-161, it will allow you to take full advantage of the PIR Technology (heat and motion detection). Thank you for choosing Night Owl!
Answered by: Manufacturer
Date published: 2018-08-16

Hi! It works with the AHD7-1682? Or AHD7-DVR 16?

Asked by: Armandolp
This camera is not compatible with the Night Owl DVR you currently have. We are sorry for the inconvenience. Thank you for choosing Night Owl.
Answered by: Manufacturer
Date published: 2018-08-02

Will this model camera (CAM-PIRHDA10W-BU) work properly as an add-on with my six camera THD 3.0 series system ?

Asked by: busrider
Yes, the camera will be compatible with the THD 3.0 series. However, you will lose the infrared capability that comes with the camera. Thank you for choosing Night Owl.
Answered by: Manufacturer
Date published: 2018-07-13

Hello, I have the night owl DVR-HDA10PB-8 DVR system with 8 cameras and I need to replace one of the cameras. I need to know if the replacement camera is a plug & play or if it would require additional set up to work with my system.

Asked by: javiersan
As long as the cable is not defective and the connections are good, then yes it should be a simple swap at the camera installation location. This DVR is compatible with our 1080p, 720p and standard analog ((400 to 900 TVL) wired BNC cameras. Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2018-04-04

I have purchased a night owl camera recently from a friend. Can't get it to run to my TV do I have to have a night owl receiver?

Asked by: Justin33
Good Morning Justin, Congratulations on your first Night Owl camera. This camera is not a standalone camera and will require a DVR to work. This model is only compatible with Night Owl HD Analog DVR's. Please follow the link below to view all the standalone DVR's compatible with your camera. http://nightowlsp.com/products/stand-alone-dvr-s-nvr-s/stand-alone-hd-dvr-s/8-channel.html Thank you for choosing Night Owl and Have a Great Day!
Answered by: Customer Support
Date published: 2018-03-13

Is this camera compatiable with Night Owl Lite B-10HLDA-841-1080 Video Surveillance System DVR?

Asked by: Ray518
Good Morning Ray, Yes, this camera is fully compatible with that DVR. Thank you for choosing Night Owl and Have a Great Day!
Answered by: Customer Support
Date published: 2018-03-01

I have a night owl HD 3.9. The night vision is not as clear as other night owl camera's I've seen. I want to upgrade my camera. What camera would you recommend for better night vision?

Asked by: Alexgoalex
Hi Alex, Not sure exactly which model DVR you have, but we do have a variety of add-on 720p and 1080p HD cameras available on our sales site. Please view the link below for more information. The best camera we have for Night Vision is our THD30 camera (with up to 130 ft.). However, this camera is only compatible with our THD30 DVR. I have included a link to one of these systems for you to reference as well. Wired HD Cameras http://nightowlsp.com/products/cameras/wired-hd-cameras.html THD30 System http://nightowlsp.com/products/complete-security-systems/hd-security-systems/8-channel/thd301-88p.htmlThank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2018-02-20

What is the best camera to add to my new system C-841-PIR3MP

Asked by: Shorty 69
Our C-841-PIR3MP is compatible with our C-CAM2PK-T3MP which is available on Costco.com. Please view the following link for more information. https://www.costco.com/Night-Owl-3MP-Add-on-Wired-Infrared-Camera-2-pack.product.100371843.html?pageSize=96&catalogId=10701&dept=All&langId=-1&keyword=C-CAM2PK-T3MP&storeId=10301 Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2018-02-02

will this camera work with my AHD10B-81-RS system

Asked by: RonF
Yes, this camera is fully compatible with that system. Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2018-02-01

Will this camera be compatible with the HDA10LB-16 DVR? If so will the DVR be able to record the full resolution of the camera?

Asked by: JSchabs
Yes the camera is compatible. However, that DVR is an HDA10L. The resolution of this DVR is somewhere in between 720p and 1080p. Thus, you will not receive the full 1080p of the camera. The image quality should still be great though. Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2018-01-18

Can I add this camera to my night owl c-841-a10 system?

Asked by: Blu_wj
Yes. This camera is fully compatible with that system. Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2018-01-08

Will this add on camera work with my 16 channel CL-HDA30-161022P DVD system?

Asked by: Den432
Yes, this camera is fully compatible with that DVR. Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2018-01-03

Is this camera compatible with my DVR1? I have 4 Night Owl 1080p HD 100ft night vision bullet cameras.

Asked by: Wanda Rivera
Not sure which DVR you have. However, if your other 1080p Night Owl cameras function with it, then Yes, this camera will as well! Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2017-12-21

I am replacing existing analog cameras with these and some cable runs are over 180 feet will I get a picture?

Asked by: Asphalt21
215ft over coax and the picture quality matches the 10ft run. Great product!!!!
Answered by: Asphalt21
Date published: 2017-11-08

does this camera have invisible leds? do you sell cameras with invisible led night vision?

Asked by: marvin 88
No, we do not sell any cameras with invisible LEDs. The LEDs in our cameras glow red at night. Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2017-11-07

What does PIR stand for?

Asked by: Jordi
Passive Infrared. This camera utilizes heat and motion to determine when an event has occurred, which drastically reduces false alarms and conserves hard drive space. Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2017-11-06

 Does this work with the C–841-A10 dvr model from Costco?

Asked by: Mhall09
Yes, this camera is compatible with that DVR. Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2017-10-20

What is the low temperature that these cameras will operate?

Asked by: rchipka
The operating temperature range of this camera is -14 degrees F to 122 degrees F. Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2017-10-19

What technology do your HD cameras run on.(ie. HD-TVI, HD-CVI)? Will your HD DVRs support other makes of cameras? Do you supply license plate cameras to work with your HD DVR?

Asked by: CJB0
This CMOS camera uses AHD technology. We are not able to guarantee 3rd party compatibility with our systems. If installed at the right angle and in a good viewing location, you should be able to see license plates. However, much of this depends on your setup and view-ability. Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2017-10-19

I called tech support and asked if these cameras were compatible with my F6-DVR8 system and the tech said yes. I purchased 4 cameras and cannot get any of the cameras to show a picture. tech sup is sending new cameras, is this system compatible?

Asked by: Tyson
No. These are HD cameras that will not be compatible with our standard analog DVRs, such as the F6. They will be compatible with our HD DVRs including our, AHD10, HDA and XHD Series. I am sorry this was not correctly explained to you prior to purchase. Thank you fro choosing Night Owl!
Answered by: Customer Service
Date published: 2017-09-05

Is this camera compatible with the costco exclusive 3mp 8 channel dvr ?

Asked by: AskWho
Hello, This camera will be compatible with your system. Best regards
Answered by: Carlos G
Date published: 2017-08-22

Is this camera compatible for use on my AHD7 system?

Asked by: ILMJETFUEL
No. This is a 1080p camera and will not be compatible with your 720p DVR. You will need to upgrade to a 1080p DVR or one of our XHD series systems to utilize this camera. Please view the below link for one option. http://nightowlsp.com/products/stand-alone-dvr-s-nvr-s/stand-alone-hd-dvr-s/8-channel/hda10l-dvr8-1tb.html Thank you for choosing Night Owl!
Answered by: Customer Service
Date published: 2017-08-11

Do i need to update my firmware on my HDA10P-10BU-882-BB to use this camera?

Asked by: Spidey696
You should always ensure the most recent firmware is updated on your DVR. To do so, login to the DVR, go to the Advanced Menu, select Auto Upgrade, ensure the Auto Upgrade feature is enabled and then click on Detect to see if you have the most up-to-date firmware. This camera should be fully compatible with your HDA10P DVR. Thanks for choosing Night Owl!
Answered by: Customer Service
Date published: 2017-06-22

I saw this camera at Costco Can you email. Me an installation manual and users guide.? CN you few cameras live without recording?

Asked by: David143
Good Afternoon, Please find the users manual attached. Yes, you can view your cameras in Live View mode on a TV/Monitor, PC/Mac or smart device. https://ferrismarketing.app.box.com/s/kfyzqni0aeba0jpulm60y6wakjqic40i Thanks for choosing Night Owl!
Answered by: Customer Service
Date published: 2017-06-22

I just bought these security camera. I was just wondering if I can see peoples heat when I watch them on the screen. 

Asked by: Jj3907
Good Afternoon, No, these are not thermal cameras. While the PIR sensor will detect heat from people, animals and vehicles, it will not result in a thermal image. Thanks for choosing Night Owl!
Answered by: Customer Service
Date published: 2017-06-16

I have just purchase a c-841-pir3mp system from Costco. I want to purchase additional cameras and cables. What model number do I need to buy.

Asked by: Westley
Good Afternoon, We are in the process of making an Add-on 2pk of these cameras available on Costco.com. Please check back periodically for availability. Thanks for choosing Night Owl!
Answered by: Nick E
Date published: 2017-06-05

HI, I want to prewire my house to use nightowl cameras. What kind of cable/wire do you recemmend for that.

Asked by: DoItYourself
Analog systems all use BNC cabling and a 12 volt DC cable, but digital, for full HD video, use power over Ethernet (POE) without a separate power cable.  Whatever you choose be sure that the wiring has good shielding and is not run close to power cables, especially higher voltage 220 volt lines.  If I were you I would wire every room and camera location with CAT6 Ethernet cabling.
Answered by: NightUser
Date published: 2017-06-01

Hi, I have AHD10 series with 8 channels. I want to add this camera and wonder if this works with mine? thanks

Asked by: Bernard
Yes, this camera will be fully compatible with your DVR. Thanks!
Answered by: Nick E
Date published: 2017-04-26

If i mount these camras inside my window frames. Placing them right up to the inside of my house windows. Will they still work. Or will the heat of the windows cause false alerts?

Asked by: Cammmmmmmm
Good Afternoon, We do not recommend installing your cameras in that capacity and the heat sensor and motion sensor could both be affected by the effect of the sunlight on the glass. The would likely effect the number of false alerts you receive an would affect your image quality as well. Thanks for choosing Night Owl!
Answered by: Nick E
Date published: 2017-03-21

What is the heat-signature detection range? I am thinking about placing one of these cameras under an eave about 10' above the ground. Would this be an effective camera to sense motion and heat or should I use another one of your cameras?

Asked by: Raul Castro
Good Afternoon, Yes, this camera detects both heat and motion and we recommend installing it at least 7 ft. above the ground and angling the camera slightly downward. Additionally, the heat sensor works best for side to side movement so it is recommended that you install it to the side of what you are trying to capture. Thanks for choosing Night Owl!
Answered by: Nick E
Date published: 2017-03-13
  • y_2020, m_1, d_26, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_51
  • loc_en_US, sid_CAM-PIRHDA10W-BU, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_nightowl
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 131.44ms
  • QUESTIONS, PRODUCT

Related Products

Check items to add to the cart or